Due to courier restrictions, we CANNOT send anymore than 1L of this item to the following UK post codes (where just the first two letters are shown, it applies to the whole postal area): ZE, BT, GY, IM, IV40/49/51, JE, KW15-17, HS, KA27-28, PA20-38/41-49/60-78, PA80, PH41-44, PO30-41, TR21-25.  Any orders placed for more than 1L total volume going to these post codes will be cancelled.

After-Shine is a specially formulated silicone spray and provides you with the ultimate bike frame protection. After-Shine will leave your plastic and metal parts with a high-gloss finish. After-Shine will also leave behind a protective layer on your bike for your next ride!

Why use it?

• Product comes with trigger.
• Motoverde Bike Wash is 100% salt-free, with no corrosive components (including acids/alkalines) in the product making it the safest cleaner on the market!
• Fully biodegradable with recyclable packaging.
• Completely safe to use on all surfaces including paints, plastics, anodised parts, sensitive metals (including aluminium) and carbon fibre.
• Safe for use on all E-Bikes.
• Tough on dirt but gentle to your bike and its parts. Our Bike Wash will remove mud, dirt and grime with ease, whilst also removing sand and clay stains! Can also be used on your kit, boots and helmets.
• High-foaming product that clings to your bike and does the work for you!
• Contains UV protection to protect your paint colours from fading in sunlight.

Instructions for use

• Rinse excess dirt off bike.
• Product is ready to use. Simply attach trigger and spray away!
• Apply Motoverde Bike Wash, leaving to soak for 15-20 minutes (5 minutes if in a rush). The longer soak time, the better the results as it is non-aggressive!
• Agitate with a brush or sponge if required for stubborn dirt.
• Rinse off.
• For best results use Motoverde After-Shine following.
• For kits: add at least 500ml of product into a bucket of warm water and submerge your kit inside.
• You can also throw in your goggles and straps before leaving to soak overnight.
• The following morning, remove your goggles and straps and rinse under a tap until all chemical excess has been removed then leave to air dry.
• With trousers, place these on the floor and agitate the bottom area with a sweeping brush to loosen excess dirt before placing directly into your washing machine, alongside kit top.
• Wash your kit at 30 degrees on a normal wash or sports wash.
• At the end of the wash cycle your kit will be the cleanest you have seen it since the day you purchased it!
• For boots and helmets: simply spray product all over and leave to soak for 15 minutes before agitating with a brush/sponge if required. Rinse off!

For best results, use with Motoverde’s other products

• STEP 1 - BIKE WASH
• STEP 2 - DRIVETRAIN CLEANER
• STEP 3 - AIR FILTER CLEANER
• STEP 4 - AFTER-SHINE

Health & Safety

Ingredients: Regulation (EC) No. 648/2004: <5% Amphoteric, Anionic & Non-Ionic surfactants. Benzisothiazoline.
Allergens: Contains 1, 2-benzisothiazolin-3-one. May produce an allergic reaction.
Keep out of reach of children. Store in a cool, dry place away from direct sunlight.