Road 0121 747 1284 / Off Road 0121 747 22 90
service centre - Find Out More
in house printing - customise your wheels
open 7 days a week - come find us

Arai (Pinlock) - L-Type *Max Vision* (DKS444)

Code: arai-pinlock---l-type-max-vision-dks444
  • From £22.99
  • (Delivery from £12.95)
Item in Stock | Usually dispatched within 24 hours
Order within for delivery on Friday 20th May
Loading...

Compatible with Max Vision (larger) visors only - will not fit on the standard size visor.

 

Our top of the line fog resistant solution for professionals developed to eliminate fogging in demanding weather conditions. The Pinlock 120 creates a double shield system through a silicon seal between the helmet face shield and Pinlock insert lens, which makes up a double glass type of solution that prevents fogging. The insert is made of a moisture absorbing plastic and therefore, the surface basically dry when used. This air-tight pocket ensures that the difference in temperature becomes significantly lowered. The Pinlock insert absorbs moisture on the inside and offers you continuous clear visibility. The Pinlock 120 insert lens is commonly used by professional riders competing in premier racing series such as MotoGP, World Superbike Championship (WSBK), Isle Of Man TT and more! The lens is offered in a custom fit size that can be found in top range helmets on the market.

 

Suitable for: 

  • Astro J
  • Astro R
  • Astro Light
  • Axces (original)
  • Chaser (original)
  • Condor
  • NR-5
  • Quantum E/F
  • Rapid
  • RX-7 Corsair
  • Viper GT

Deliverys

We send orders via a range of couriers based on the cost/size of the order and the delivery location.. The most common used are Royal Mail for smaller items and Parcel Force for Larger items in the UK and Fedex for Overseas.

Returns

We are more than happy to recieve returns upto 30x Days after purchase if you decide the item is not for you.. It must be in original packaging and of course not have been used.. Helmet visor protective covers must also be attached and not been removed

+ Read More
Be the first to review (Pinlock) - L-Type *Max Vision* (DKS444). Write a review

Start with measuring your head to get an idea of the size to look for: measure (in cm) the circumference across the forehead, above the eyes and ears and over the small bump at the back of the head, read the size where the tape joins.

Sizing Chart (cm)

XS - 53-54
S - 55-56
M - 57-58
L - 59-60
XL - 61-62
XXL - 63-64

Fit the measured size. Focus on your head size (crown fit) measurement first, e.g. the area contacted by a baseball caps' band. Do not be concerned with facial fit at this stage. When you can't get the helmet past your cheeks or jaws, do not think it's too small and reach for a bigger size. The helmet must fit your head!

How? Remove the cheek pads and try on helmet sizes until you get that snug crown fit. For the most comfort the interior must fit snugly all around the crown of your head. You should feel some pressure at all the contact points around the interior perimeter, too much pressure could become uncomfortable in the future.

Finally, Arai's optional cheek pad thicknesses, and on some models the replaceable interiors, can fine-tune your personal fit. All Arai cheek pads can be replaced with a size that better suits your facial structure. But this fit should be addressed only when the crown size is correct.

Besides the replaceable cheek pads, selected models feature the "Peel-away Cheek Pad Layer" and "Peel-away Temple Pad Layer". The pads of these models can be made thinner easily by removing a 5 mm thick peel-away layer for added room if needed.

In special cases, Arai helmets can be made to measure.

We offer up to 6 different sizes outer shells. Unlike many other manufacturers Arai provides one size outer shell for each two helmet sizes for most models, adding up to four outer shell sizes within limited models. Starting with XXXS (49-50) for really small heads up to XXXL (65-66) for really large heads. Most other manufacturers may struggle to reach three different sizes for their complete size range.

The advantage of using different shell sizes (instead of just one or two outer shells and the use of additional more or less foam padding to stretch the size range) is that of all helmets the inner shell and comfort material can always maintain the correct thickness for every size. This guarantees that all Arai helmets provide the same high graded protection. Also it is not by the likes of Arai to see a very small person with a rather big, ‘oversized' looking helmet. Besides this cosmetic disadvantage, it is also possible that wearing an extremely large helmet may cause possible added injury.

Besides the different shell sizes, another characteristic of Arai is the use of different shell shapes for different models. There is for instance the G-shell for a more rounded human head and the L-shell for longer narrower faces. Arai has even developed different shaped inner and different sizes outer shells for different continents! One for Europe, one for Asia and one for North and South America since there are significant differences in head shapes among these regions.

Top