Road 0121 747 1284 / Off Road 0121 747 22 90
service centre - Find Out More
in house printing - customise your wheels
open 7 days a week - come find us

Arai (MX22) Helmet - MX-V - Plain Gloss White

Code: AR-MXV-P-W
  • £410.00
  • (FREE UK Delivery)
Item in Stock | Usually dispatched within 24 hours
Order within for delivery on Friday 20th May
Loading...

The brand new MX-V evolved from the much loved VX-3 model. Years of experience can be found in this ultimate off road helmet. The perfect choice for MX, enduro and off road use. Just as found in every Arai helmet, the basic and simple organic shell shape is based on the R75 Shape concept. The absence of exaggerated edges or protrusions on the shell is not a lack of creativity, but a commitment to maintaining the integrity of the shell with real world impact performance

 

  • Outer shell cLc (complex Laminate construction) - Contains a specially designed composite fibre that is sandwiched between the two layers of Super Fibre Laminate. The composite fibre acts as a reinforcement layer without adding significantly to the weight of the helmet.
  • Ventilation - Easy to clean diffusers create a strong venturi vacuum at the rear. Centre top vent for increased airflow. Under-peak air intake collects en directs cool air into the helmet. Inner chin vent shutter prevents debris coming into the helmet in dusty riding conditions. Goggle ventilation and lower side vents.
  • Mouth vent - Mounted from the outside to further improve penetration resistance. The one-piece, stainless steel mesh screen provides a durable barrier against roost while minimising mud packing. The removable screen is easy to clean.
  • Dry-Cool® liner - The completely removable and washable Dry-Cool® interior lining is developed for and tested in MotoGP. It uses micro water cells to improve moisture and heat transfer from the head to the airflow and dries much faster than conventional textiles. Keeps your head cooler and dryer during a long ride.
  • Facial Contour System (FCS) - To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds.
  • Innovative peak - The Arai peak scavenges and forces air into the forehead vent ports for cooling while at the same time using multiple relief-ports to reduce “lifting” at higher speeds.
  • Dirt removal - The elongated and rounded peak helps protect the rider from mud or other objects. The going-through vent ducts and removable rear vent also allow you to remove dirt easily.
  • Goggle band guidance - The eye-opening side trim and ridged vent ducts design allow the goggle band to sit firmly even during hard riding.

 

PLEASE NOTE: ALL OUR HELMETS WILL BE SUPPLIED WITH ECE2205 CERTIFICATION AS WE ARE BASED IN THE UK.  THIS MEANS THAT OUR HELMETS WILL NOT HAVE DOT/SNELL/ANY OTHER APPROVAL LABELS ATTACHED, AND THEREFORE WILL PROBABLY NOT BE CLASSED AS ROAD LEGAL WITHIN YOUR COUNTRY IF YOU ARE OUTSIDE THE UK AND EU.

Deliverys

We send orders via a range of couriers based on the cost/size of the order and the delivery location.. The most common used are Royal Mail for smaller items and Parcel Force for Larger items in the UK and Fedex for Overseas.

Returns

We are more than happy to recieve returns upto 30x Days after purchase if you decide the item is not for you.. It must be in original packaging and of course not have been used.. Helmet visor protective covers must also be attached and not been removed

+ Read More
Be the first to review (MX22) Helmet - MX-V - Plain Gloss White. Write a review

Start with measuring your head to get an idea of the size to look for: measure (in cm) the circumference across the forehead, above the eyes and ears and over the small bump at the back of the head, read the size where the tape joins.

Sizing Chart (cm)

XS - 53-54
S - 55-56
M - 57-58
L - 59-60
XL - 61-62
XXL - 63-64

Fit the measured size. Focus on your head size (crown fit) measurement first, e.g. the area contacted by a baseball caps' band. Do not be concerned with facial fit at this stage. When you can't get the helmet past your cheeks or jaws, do not think it's too small and reach for a bigger size. The helmet must fit your head!

How? Remove the cheek pads and try on helmet sizes until you get that snug crown fit. For the most comfort the interior must fit snugly all around the crown of your head. You should feel some pressure at all the contact points around the interior perimeter, too much pressure could become uncomfortable in the future.

Finally, Arai's optional cheek pad thicknesses, and on some models the replaceable interiors, can fine-tune your personal fit. All Arai cheek pads can be replaced with a size that better suits your facial structure. But this fit should be addressed only when the crown size is correct.

Besides the replaceable cheek pads, selected models feature the "Peel-away Cheek Pad Layer" and "Peel-away Temple Pad Layer". The pads of these models can be made thinner easily by removing a 5 mm thick peel-away layer for added room if needed.

In special cases, Arai helmets can be made to measure.

We offer up to 6 different sizes outer shells. Unlike many other manufacturers Arai provides one size outer shell for each two helmet sizes for most models, adding up to four outer shell sizes within limited models. Starting with XXXS (49-50) for really small heads up to XXXL (65-66) for really large heads. Most other manufacturers may struggle to reach three different sizes for their complete size range.

The advantage of using different shell sizes (instead of just one or two outer shells and the use of additional more or less foam padding to stretch the size range) is that of all helmets the inner shell and comfort material can always maintain the correct thickness for every size. This guarantees that all Arai helmets provide the same high graded protection. Also it is not by the likes of Arai to see a very small person with a rather big, ‘oversized' looking helmet. Besides this cosmetic disadvantage, it is also possible that wearing an extremely large helmet may cause possible added injury.

Besides the different shell sizes, another characteristic of Arai is the use of different shell shapes for different models. There is for instance the G-shell for a more rounded human head and the L-shell for longer narrower faces. Arai has even developed different shaped inner and different sizes outer shells for different continents! One for Europe, one for Asia and one for North and South America since there are significant differences in head shapes among these regions.

Top