Road 0121 747 1284 / Off Road 0121 747 22 90
service centre - Find Out More
in house printing - customise your wheels
open 7 days a week - come find us

Arai (2021) Helmet - Tour X4 Depart (Metallic Blue)

Code: AR-TX4-DEPART-MB
  • £579.99
  • (FREE UK Delivery)
Item out of Stock | Usually dispatched within 24 hours
Loading...

The Tour-X4 adventure motorbike helmet has a complete new outer shell. Redesigned to be tougher, stronger and stiffer than ever. As the Tour-X4 may be used under extreme conditions, the ventilation system has been redeveloped for maximum efficiency. The new Facial Contour System (FCS) offers more support and comfort to the lower jaw and creates a tighter fit. For an even better personal fit, there is a removable 5 mm surface foam layer on the cheek pads and temple pad from the headliner. Wear the Tour-X4 with or without peak, with or without visor and combinations of these two. The large visor opening offers plenty of room for motocross-style goggles when riding without visor.

 

  • Super Fibre Construction (SFC)
  • Triple density inner shell
  • Two TDF3 front ducts
  • TX4 diffuser
  • Side exhaust vents
  • New controlled chin ventilation
  • Aeroflap – reduces wind noise and turbulence
  • Flatter neck roll to minimise turbulence
  • Visor/peak holder pressure plate enlarged for extra stability
  • Patented visor brow vents
  • Wear with or without peak/with or without visor or combination of the two
  • Enhanced visor with aerodynamically designed visor levers and brow vents
  • Facial Contour System (FCS) with removable 5mm foam layer on cheek pads
  • Removable 5mm temple pads on the head liner
  • Fully washable and removable Dry Cool® interior
  • Emergency release tab cheekpads
  • Optional holder set to use peak or visor only
  • Double ‘D’ ring fastening system ensures correct strap tension at all times
  • Visor Pinlock® ready and Pinlock® insert included
  • Supplied with clear visor

PLEASE NOTE: ALL OUR HELMETS WILL BE SUPPLIED WITH ECE2205 CERTIFICATION AS WE ARE BASED IN THE UK.  THIS MEANS THAT OUR HELMETS WILL NOT HAVE DOT/SNELL/ANY OTHER APPROVAL LABELS ATTACHED, AND THEREFORE WILL PROBABLY NOT BE CLASSED AS ROAD LEGAL WITHIN YOUR COUNTRY IF YOU ARE OUTSIDE THE UK AND EU.

Deliverys

We send orders via a range of couriers based on the cost/size of the order and the delivery location.. The most common used are Royal Mail for smaller items and Parcel Force for Larger items in the UK and Fedex for Overseas.

Returns

We are more than happy to recieve returns upto 30x Days after purchase if you decide the item is not for you.. It must be in original packaging and of course not have been used.. Helmet visor protective covers must also be attached and not been removed

+ Read More
Be the first to review (2021) Helmet - Tour X4 Depart (Metallic Blue). Write a review

Start with measuring your head to get an idea of the size to look for: measure (in cm) the circumference across the forehead, above the eyes and ears and over the small bump at the back of the head, read the size where the tape joins.

Sizing Chart (cm)

XS - 53-54
S - 55-56
M - 57-58
L - 59-60
XL - 61-62
XXL - 63-64

Fit the measured size. Focus on your head size (crown fit) measurement first, e.g. the area contacted by a baseball caps' band. Do not be concerned with facial fit at this stage. When you can't get the helmet past your cheeks or jaws, do not think it's too small and reach for a bigger size. The helmet must fit your head!

How? Remove the cheek pads and try on helmet sizes until you get that snug crown fit. For the most comfort the interior must fit snugly all around the crown of your head. You should feel some pressure at all the contact points around the interior perimeter, too much pressure could become uncomfortable in the future.

Finally, Arai's optional cheek pad thicknesses, and on some models the replaceable interiors, can fine-tune your personal fit. All Arai cheek pads can be replaced with a size that better suits your facial structure. But this fit should be addressed only when the crown size is correct.

Besides the replaceable cheek pads, selected models feature the "Peel-away Cheek Pad Layer" and "Peel-away Temple Pad Layer". The pads of these models can be made thinner easily by removing a 5 mm thick peel-away layer for added room if needed.

In special cases, Arai helmets can be made to measure.

We offer up to 6 different sizes outer shells. Unlike many other manufacturers Arai provides one size outer shell for each two helmet sizes for most models, adding up to four outer shell sizes within limited models. Starting with XXXS (49-50) for really small heads up to XXXL (65-66) for really large heads. Most other manufacturers may struggle to reach three different sizes for their complete size range.

The advantage of using different shell sizes (instead of just one or two outer shells and the use of additional more or less foam padding to stretch the size range) is that of all helmets the inner shell and comfort material can always maintain the correct thickness for every size. This guarantees that all Arai helmets provide the same high graded protection. Also it is not by the likes of Arai to see a very small person with a rather big, ‘oversized' looking helmet. Besides this cosmetic disadvantage, it is also possible that wearing an extremely large helmet may cause possible added injury.

Besides the different shell sizes, another characteristic of Arai is the use of different shell shapes for different models. There is for instance the G-shell for a more rounded human head and the L-shell for longer narrower faces. Arai has even developed different shaped inner and different sizes outer shells for different continents! One for Europe, one for Asia and one for North and South America since there are significant differences in head shapes among these regions.

Top